TR7 TR8 Front Anti-Roll Bar Mounts With Increased Caster

Usually ships within 1-2 days
(3 reviews)
Current Stock:
Adding to cart… The item has been added

Machined Anti-Roll bar blocks with a recess for the anti-roll bar bush so it will actually bolt up properly, this recess and new bolt holes are offset from the original mounting holes so the anti-roll bar is pulled forward by 14mm, this will pull the track control arm forward increasing the caster by almost 1.5 degrees. Increased caster improves steering response, makes braking more stable, increased negative camber on outside wheel in corners and improved high speed stability, a benefit for all TR7 & TR8's.


Price is for a PAIR of brackets All bolts supplied Anti roll bar clamps NOT supplied


  • 4
    Anti roll bar mounts

    Posted by Patrick Ledford on 25th Jul 2023

    I had to re-tap one thread and bolt before installation as it was cross threaded.

  • 5
    Front Anti-roll bar brackets

    Posted by Michael Keeter on 4th Jul 2023

    The product is well made and designed. It fit perfectly and altered the front suspension as advertised. I would advise all TR-7/8 owners to install when they are refreshing their front suspension components.

  • 5
    Straight forward to install

    Posted by Darrell Walker on 4th Feb 2020

    This was straight forward to install, but takes some muscle to pull the anti-roll bar forward. I expected that I would have to reset the toe alignment, but it was still spot-on. It replaced another anti-dive spacer, so I didn't notice (or expect) and difference there. What I did notice was that the little bit of vagueness in the steering at center is now gone, it is tight and responsive. I have 15" wheels (205/50) on 7" wide, and had to adjust the front lower fender a bit. Some people need to do that even just going with wider wheels, but I didn't need to until installing this kit.