XLifter Integrated Key Box Mounting Bracket For Land Rover LR4
XLifter
€17.12
(No reviews yet)
Write a Review
XLifter
XLifter Integrated Key Box Mounting Bracket For Land Rover LR4
The “key box” placed next to the gear shift knob/stick is an excellent spot. The 12V plug adjacent makes hard-wiring of the power wire easy. The bracket fills a whole “key box” around the edges - no small stuff falling beneath anymore... And there is a slot for 2 coins.
The bracket “foot” height is about 2 centimeters, making the controller top surface align with the console (so the bracket is about 1 cm buried). The final result is a clean-looking and tidy install.
Installation: This is a “full backside” bracket, designed to replace the controller’s backside (base variant) or full case replacement (the base + cover variant). Unscrew 4 screws, remove the backside (or whole case), push the power plug through the bracket’s hole and screw the controller directly on the base part or insert the controller into the base+cover and screw it all together. Finally, it is optimal to have the 12V power cable hard-wired under the console.
This video shows installation of the Oval Console Mounting Bracket, but the hardwiring to the 12V power plug is the same process for the Key Box Bracket.
LR4 / Discovery 4 V8 5.0 Liter | 10 - 13
LR4 / Discovery 4 V6 3.0 Liter | 14 - 16
