123\PORSCHE-911-BIG-6-R-V Switched 3.0 This is different than the 3.3, 2.7 and 2.4 in that the drive gear goes opposite direction. You cannot use it with the 6 pin CDI. Use without or with the 3 pin.
for Porsche > 911 6 cylinder 3.0 How to wire the 3pin HKZ and 123ignition
Red from 123 to 12v Terminal "B"
Black from 123 to Terminal "C" and Black/Violet Tachometer wire
Terminal "A" from HKZ to +ve side of coil
Neg -ve side of coil to ground
The 123\PORSCHE-911-BIG-6-R-V is designed for Porsche 911 3.0 L 6 cylinder engines.
Suitable for engines without HKZ (CDI) unit or first generation HKZ unit ( 3 wires ).
Warning: Don't use the original HKZ (CDI) coil direct on the 123ignition.
The unit offers a maximum total of 16 advance-curves to be selected by the end-user.
Please take a look in the table below for available advance curves.
SPECIFICATIONS |
cylinders: | 6 |
direction: | CW/CCW |
voltage: | 4,0-15,0 Volts |
range: | 500 - 8000 rpm |
temperature: | -30 to 100 Celsius |
coil: | stock or High Energy coil, primary coil NOT below 1,0 ohm |
dwell: | constant current, fully autom. |
time-out: | after 1 second current is switched off |
spark-bal.: | better than 0,5 degr. crankshaft |
vacuum: | starts at 100 mmHg, ends at 10 degr. @ 300 mmHg |
max.advance: | 45 degr. crankshaft |
wiring: | red = +6V or +12V, black = '-' coil |