Gear Distributor Drive Gear ERC1353 For Range Rover Classic, 1987 - 1994
Aftermarket
A$128.12
Product Description
With slot for oil pump drive.
Requires roll pin hole drilling to suit application
- Put the drive gear on the bottom of the distributor and run a 5mm (13/64) drill through both the distributor drive gear and the shaft to mate the two before you try tapping the pin in.
- Clean all metal off of the gear, this is very important.
- Lubricate the gear with engine grease, cam break in lubricant or Vaseline is fine.
Specifications and additional product information
Range Rover Classic 70-95 - All 1976 on distributors (with slot for oil pump drive) - Quantity Required - 1