![the 123\DS-R is essentially the same unit as the 123\DS-A : it contains the same set of 16 advance-curves.
Two curves are dedicated to the Traction-Avant engines, the 'Perfo' and the '11D'.
For the 'H'-van there are two advance-curves too, both for the 'H78'-engine. One of these has a so-called 'rev-limiter', to prevent unwanted engine-damage.
Might you require vacuum-advance : specify a '123\DS-R-V'. the 123\DS-R is essentially the same unit as the 123\DS-A : it contains the same set of 16 advance-curves.
Two curves are dedicated to the Traction-Avant engines, the 'Perfo' and the '11D'.
For the 'H'-van there are two advance-curves too, both for the 'H78'-engine. One of these has a so-called 'rev-limiter', to prevent unwanted engine-damage.
Might you require vacuum-advance : specify a '123\DS-R-V'.](https://cdn11.bigcommerce.com/s-6c6d0/images/stencil/300x300/products/3967/6324/123DU__11291__45713.1613052393.jpg?c=2)
Citroen DS 1962 and Earlier with Vacuum
123Ignition
$464.95
$494.95
(You save
$30.00
)
for Citroen ID, DS
![]() | 123\DS-A-V is a distributor, specifically targeted for the Citroen ID/DS. It contains all the curves for carbureted ID/DS-engines as originally specified by Citroen, for cars 1962 and earlier With a switch you can easily choose the advance-curve that was specified for your engine. It comes with an angled distributor-cap, for easy access to the sparkplug-leads. Might you prefer un upright cap, please specify a '123\DS-R-V For ID's until 2/1964 Citroen used a distributor with vacuum-advance. To replace this you should order a '123\DS-R-V'. ID-19B's from 9-'66 until 9-'68 with 'DV'-engine , and DS19A / DS19MA & ID19FA with 'DY'-engine from '65 to '68 require a different fixation. For these cars we offer a '123\DV-R' with a special mounting bracket. | |||||||||||||||||||||||||||||
installation manual ![]()
|